This Burton high back mounting kit is for most pre 2012 Burton adult bindings and some youth. Burton has gone through several high back variations for mounting over the years and have 5 different washer types. Only 2 washer types matter now. If you are unsure email us and send in a picture of what you have. Always best to send a picture of a part if you have one or a picture of the base tray and high back where they come together. Once we have that we will get you hooked up.
- Burton Highback Hardware Kit 1
- 4 T Nuts
- 4 Screws With A Small Amount Of Thread Lock
- 4 Plastic Washers 16mm wide by 19mm long
- Screw threads are 12mm and total screw length is 15mm
Need Burton High Back Kit 2, follow link below
Burton has several variations and there is a lot of confusion out on the web about these things. Well we have you covered. Burton Highback kits 1 and 2 are nearly the same. Call Burton that is what they will tell you. Kit 2 is a perfect fit for most adult bindings and some kids made since 2012. Kit 1 will work for most bindings made prior to 2012 and going all the way back to the late 90's.
If you have older bindings then Hardware Kit 1 is the best choice since the plastic toothed washer is easier to set in place. Kit 1 will Not Work with newer bindings. But, Kit 2 will work for all bindings it is just little harder to set the washer in place when used with older bindings. Heck even Kit 1 will work with newer bindings with a little grinding of the washer.
Last thing here. Do you have the crazy expensive but awesome Burton X-Base Bindings? Guess what, those use a different t nut. Follow link above for those.
Confused? No problem if you have questions send us some pictures and give us a call and we will get you taken care of.