This Burton highback mounting kit is technically for any 2012 and newer Burton adult binding except the X-Base, and some kids and youth. Burton has gone through several high back variations for mounting over the years and have 5 different washer types. Only 2 washer types matter now. If you are unsure email us and send in a picture of what you have and we will get you hooked up.
- Burton Highback Hardware Kit 2
- 4 - T Nuts
- 4 - Screws With A Small Amount Of Thread Lock
- 4 - Plastic Washers 12mm wide by 18mm long
- Screw threads are 12mm and total screw length is 15mm
Need Burton High Back Kit 1or the X-Base, follow one of the links below.
Burton has several variations and there is a lot of confusion out on the web about these things. Well we have you covered. Burton Highback kits 1 and 2 are nearly the same. Call Burton that is what they will tell you. Kit 2 is a perfect fit for most adult bindings and some kids made since 2012. Kit 1 will work for most bindings made prior to 2012 and going all the way back to the late 90's.
If you have older bindings then Hardware kit 1 is the best choice since the plastic toothed washer is easier to set. Kit 1 will Not Work with newer bindings. But kit 2 will work for all bindings it is just harder to set the washer in place. Heck even Kit 1 will work with newer bindings with a little DIY grinding of the washer.
Last thing here. Do you have the crazy expensive but awesome Burton X-Base Bindings. Guess what, those use a different T Nut. Follow link above for those.
Confused? No problem if you have questions send us some pictures and give us a call and we will get you taken care of.