If you have any new Burton binding using the newest ReFlex baseplates and need to mount them to that Burton 3 hole I.E. 3D snowboard then these are the discs you need. You can tell what bindings you have in a couple of ways and the easiest is to look at the underneath of the binding and look for the word ReFlex. It is that simple. Another more subtle way is to look at the hole in the binding baseplate and see if it has small teeth on the edges of the hole that would match the teeth on the edges of these discs which are pretty obvious in the picture here.
- 1 pair of discs, no hardware (screws or washers)
- 3 hole pattern I.E. 3D for Burton ReFlex only baseplates
- Use with M6 X 16mm Burton hardware
These disc will use the traditional M6 X 16mm hardware that Burton has been using for years. If you need that hardware we have that too.
Burton has gone through a few variations of plates and discs over the years for the 3 hole patterns, 4 hole patterns, as well as for the Channel system and RE-FLEX bindings so if you are not sure what you need email or give us a call and we will hook you up.