This Burton X Base high back mounting kit is for X Base Burton adult bindings only. Burton has gone through several high back variations for mounting over the years and have 5 different washer types. Only 2 types matter right now. We do keep several others in stock. If you are unsure email us and send in a picture of what you have and we will get you hooked up.
The X Base is notable because it uses a specialized washer to fit the carbon high backs and a light weight titanium screw to keep the weight down.
- Burton X Base Highback Hardware Kit
- 4 T Nuts Specialized for the X Base Only
- 4 Titanium Screws With A Small Amount Of Thread Lock
- 4 Plastic Washers 13mm wide by 18mm long
- Screw threads are 10mm and total screw length is 15mm
Need Burton High Back Kit 1 or Kit 2, follow links below
This high back kit is for the X Base Burton binding only.
Burton has several variations and there is a lot of confusion out on the web about these things. Well we have you covered. Burton Highback kits 1 and 2 are nearly the same. Call Burton that is what they will tell you. Kit 2 is a perfect fit for most adult bindings and some kids made since 2012. Kit 1 will work for most bindings made prior to 2012 and going all the way back to the late 90's.
If you have older bindings then Hardware kit 1 is the best choice since the plastic toothed washer is easier to set. Kit 1 will not work with newer bindings. But Kit 2 will work for all bindings. Heck even Kit 1 will work with newer bindings with a little grinding of the washer.
Confused? No problem if you have questions send us some pictures and give us a call and we will get you taken care of.